Technical notes
A procurement manager answers common questions about Balluff encoders, inductive proximity sensors, Balluff IO-Link Device Tool download, and whether metrology CMM applications need specialized feedback. Plus one Eppendorf pipette pen question.
Read note →A buyer's guide to Balluff encoders, Balluff sensor testers, micrometers, calipers, and pipette sets — including honest thoughts on Mitutoyo vs Starrett calipers and why transparent pricing matters.
Read note →A procurement manager's story about choosing a Balluff BNI006A IO-Link master, a Balluff cylinder position sensor, a PROFINET encoder, and why the 2000 multimeter wasn't the real tool. Includes where to buy Mitutoyo calipers.
Read note →An administrative buyer shares hard-won lessons about sourcing Balluff capacitive sensors, AFM60A encoders, and Fluke multimeters through official channels.
Read note →An emergency automation specialist on why rush orders for Balluff sensor cables fail, how to find the Balluff IO-Link master default IP address, and why details like flowmeters, a No. 436 micrometer, and where to buy FLIR thermal cameras matter more than speed.
Read note →A field guide to using the Balluff sensor catalog PDF, understanding Balluff color sensors, checking zero speed sensors, measuring with a ball micrometer, and how to read a Fluke multimeter under pressure.
Read note →A quality manager's field report on a Balluff laser sensor, Balluff capacitive sensor, and TOF sensor retrofit—plus how a 376 true RMS clamp meter and an Extech multimeter found the real issue.
Read note →A practical field guide for Balluff sensors, IO-Link device tool, multimeter pricing, TG268 thermal camera, and using a Tektronix oscilloscope effectively.
Read note →A Balluff quality inspector investigates a returned radar sensor, only to find the real problem was in the mounting. Along the way, a caliper battery cover, a 1009 pressure gauge, a Balluff encoder, and a Sensus water meter reveal the same lesson: measurement literacy matters.
Read note →When a line goes down, do you replace the Balluff sensor or grab a Fluke 179 true RMS multimeter? And where does the TG268 thermal camera fit? Scenario-based advice from an emergency repair veteran.
Read note →